AUTOMATIC WIRE CUTTING MACHINE
Our Automatic Cutter-250 and Automatic Cutter-500 are outstanding wire-cutting machines. Processing wire with silicone, PVC, and PTFE-Teflon jacket insulation or non-insulated wire such as; Magnet, aluminum, soft steel, Buss wire, and Much More!
Automatic Wire Cutter Machine
LET IT DO THE WORK FOR YOU!
WIRE – STRANDED OR SOLID – INSULATED OR BARE
Material Capability (Not Limited To)
-
-
- 8 Awg to 40 Awg
- Hook-Up Wire
- THHN
- MTW
- Teflon
- Thin Gauge Metal Strip
-
-
-
- Magnet Wire
- Soft Steel
- Buss
- Aluminum
- Monofilament
- Solid Copper
-
If you don’t see your wire listed, give us a call,
417-285-3684
All Automatic Cutting Machines Include: |
Check out the fantastic features our
Automatic Wire Cutting Machine has to offer you:
- Pulls Wire directly – No Pre-feeder required
- Quick and Easy Programming – No Scrolling
- Operator Selected Two-Speed Feed Rate for More Control
- Self Adjusting for All Materials
- Save, and Recall Memory
- Computerized Calibration
- All-Electric 120 v – No Air required
- Fast and Accurate at 30’/min or 15’/min
- Manufactured and Service in the USA
Call 417-285-3684 today, and let’s discuss your cutting needs.
$2799
AUTOMATIC CUTTER – 250 or AUTOMATIC CUTTER – 500
(Steel Feed Rollers or Rubber Feed Rollers)
However, if rubber rollers are needed, this might be necessary if you are cutting fragile material. In particular, Magnet wire, bare wire, medical tubing, or any other material that might mark from the knurling of the standard steel rollers.
Automatic Wire Cutter Machine for Single Conductor or Multi-Conductor Wire
Undoubtedly measuring and cutting the wire to length is one of the worst menial tasks I have experienced. Whereas it might mean job security for some employees in slow times, clearly, it is not the most efficient way to get results. First, cutting wire by hand is time-consuming. Secondly, it is full of human error. Finally, it is primarily a safety hazard, all of which are eliminated using an automatic wire cutter machine.
Hook-up wire is a collective term referring to wire that hooks up two power sources. Specific jacket materials are best suited to particular environments. Cutting hook-up wire is therefore done quickly with an automatic wire cutting machine.
The PVC jacket in THHN and THWN has a nylon coating. As a result, this protects against moisture when installed in conduit or outdoor applications. MTW (Machine Tool Wire) is in machine tool applications such as control cabinets and appliance wiring. Comparatively, it is also used in dry or wet locations or exposed to oils or coolants.
Teflon wire is another type of PTFE hook-up wire suited for high-temperature applications.
Installing automation in your workplace is quick and easy when using a wire cutter that is a cut-to-length machine. Our Automatic Cutter-250 and Automatic Cutter 500 cut all wire types and more. Our machines will quickly pay for themselves. Therefore saves you time, and eliminates waste, thus, making you money. Dependable and affordable, these units will make your working environment safer and more efficient. Call us today, 417-285-3684, to discuss your wire cutting needs.